Phone: 08033093308, 08099333533

E-mail: info@westgate.com.ng

APC Smart-UPS RT 20kVA RM 230V

 

  • Output power capacity

    16.0 KWatts / 20.0 kVA

  • Max Configurable Power (Watts)

    16.0 KWatts / 20.0 kVA

  • Nominal Output Voltage

    230V

  • Output Voltage

    Configurable for 400 or 415V 3 Phase nominal output voltage

  • Output Voltage

    Distortion than 5%

  • Output Frequency (sync to mains)

    50/60 Hz +/- 3 Hz user adjustable +/- 0.1

  • Other Output Voltages

    220, 240

  • Load Crest Factor

    3 : 1

  • Topology

    Double Conversion Online

  • Waveform type

    Sine wave

 

Description

TECHNICAL SPECIFICATIONS
Main Specifications
OUTPUT
Output power capacity 16.0 KWatts / 20.0 Kva
Max Configurable Power (Watts) 16.0 KWatts / 20.0 kVA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 400 or 415V 3 Phase nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages 220, 240
Load Crest Factor 3 : 1
Topology Double Conversion Online
Waveform type Sine wave
Overload Operation 60 seconds @ 125% and 30 seconds @ 150%
Output Connections (2) IEC Jumpers (Battery Backup);(8) IEC 320 C19 (Battery Backup);(1) Hard Wire 3-wire (H N + G) (Battery Backup)
Bypass Built-in Static Bypass, Internal Bypass (Automatic and Manual), Optional External Bypass
Input
Nominal Input Voltage 230V , 400V 3PH
Input frequency 40 – 70 Hz (auto sensing)
Input Connections Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations 160 – 280V
Input Total Harmonic Distortion Less than 5% for full load
Maximum Input Current 115.0A
Input Power Factor at Full Load 0.98
Other Input Voltages 220, 240
Environmental
Operating Environment 0 – 40 °C
Operating Relative Humidity 0 – 95 %
Operating Elevation 0-3000meters
Storage Temperature -15 – 45 °C
Storage Relative Humidity 0 – 95 %
Storage Elevation 0-15000meters
Audible noise at 1 meter from surface of unit 59.0dBA
Protection Class IP 20
Online thermal dissipation 3770.0BTU/hr
Physical
Maximum Height 533mm , 53.3cm
Maximum Width 432mm , 43.2cm
Maximum Depth 773mm , 77.3cm
Rack Height 12U
Net Weight 247.73kg
Color Black
Units per Pallet 9
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte leak proof
Included Battery Modules 4
Typical recharge time 2.5hour(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)
RBC Quantity 4
Extendable Run Time 1
Battery Volt-Amp-Hour Capacity APC-Smart-UPS-RT-20kVA-RM-230V
End of Discharge Battery Voltage 93.00%
  3 – 5
Replacement Battery APCRBC140
Runtime View Runtime Graph ; View Runtime Chart
Communications & Management
Interface Port(s) DB-9 RS-232 , RJ-45 10/100 Base-T , Smart-Slot
Control panel Multi-function LCD status and control console
Pre-Installed SmartSlot™ Cards AP9631
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Yes
Available SmartSlot™ Interface Quantity 1
Surge Protection and Filtering
Filtering 0.3% IEEE surge let-through:zero clamping response time: meets UL 1449
Conformance
Approvals BSMI, EN/IEC 62040-2, EN/IEC 62040-1-1, VDE

Additional information

Weight 247.73 kg

Reviews

There are no reviews yet.

Be the first to review “APC Smart-UPS RT 20kVA RM 230V”

Your email address will not be published. Required fields are marked *